Swaraj 744 XT 4WD Specifications: Engine, Transmission, Hydraulics and PTO

The Swaraj 744 XT 4WD is a 45 HP-class tractor listed by Tractor For Everyone with a 3-cylinder, 3,478 cc engine, 4WD drivetrain, 2,000 RPM rated engine speed and 2,000 kg hydraulic lifting capacity. It is designed for demanding agricultural operations where traction, implement compatibility and dependable power are important.

Swaraj 744 XT 4WD Specifications at a Glance

Specification	Swaraj 744 XT 4WD
Brand	Swaraj
Model	744 XT 4WD
Tractor Category	46–50 HP
Listed HP on TFE	45 HP
Engine Capacity	3478 cc
Number of Cylinders	3
Rated Engine Speed	2000 RPM
Drive Type	4WD
Transmission	8 Forward + 2 Reverse
Transmission Type	Sliding Mesh / PCM
Clutch	Dual
PTO	540 / 540
Hydraulic Lifting Capacity	2000 kg
Brake Type	Oil-immersed brakes
Fuel Tank	56 litres
Wheelbase	2165 mm
Overall Length	3560 mm
Overall Width	1830 mm
Tractor Weight	2235 kg

Swaraj 744 XT 4WD Engine

The Swaraj 744 XT engine has a displacement of 3,478 cc and a rated speed of 2,000 RPM, with three cylinders. Its relatively large displacement within this power category is intended to provide the torque required for demanding agricultural operations.

Key engine specifications

• Engine capacity: 3478 cc
• Cylinders: 3
• Rated engine speed: 2000 RPM
• Bore: 110 mm
• Stroke: 122 mm
• Air cleaner: 3-stage wet air cleaner
• Service interval: 400 hours

The 3,478 cc displacement is one of the defining specifications of the 744 XT. Swaraj describes the model as having a powerful and fuel-efficient engine with high displacement and torque for its category.

For farmers, engine displacement matters because it provides useful context about the tractor's ability to maintain performance under load. However, displacement alone should not be treated as a direct measure of fuel consumption or field productivity.

Swaraj 744 XT HP and Performance

The Swaraj 744 XT is positioned in the 46–50 HP category, while Tractor For Everyone's 4WD listing specifies the model at 45 HP. This difference should be understood as a model/listing specification distinction rather than treated as two different tractor models.

The tractor's 2,000 RPM rated engine speed and 3,478 cc displacement make it suitable for a broad range of agricultural operations. Its performance is particularly relevant for farmers looking for a tractor capable of handling cultivation, ploughing, rotavation, sowing and haulage applications.

Swaraj 744 XT 4WD Transmission

The Swaraj 744 XT uses a Sliding Mesh/PCM transmission with 8 forward and 2 reverse speeds. The specification provides multiple speed options for matching tractor movement with different field and haulage requirements.

Transmission highlights

• 8 forward speeds
• 2 reverse speeds
• Sliding Mesh/PCM gearbox
• Centre-shift configuration listed
• Side-shift configuration available in the specification
• Dual-clutch configuration
• Adjustable or fixed front axle depending on configuration
• Mechanical or power steering options

The availability of different forward speeds allows operators to select an appropriate operating speed for specific implements and field conditions. Gear selection should be based on soil condition, implement load and the operation being performed.

The transmission specification is particularly important for farmers who regularly switch between field preparation, sowing, transport and PTO-driven implement work.

744 XT PTO and Hydraulics

The Swaraj 744 XT PTO operates at 540/540 with four multi-speed forward and one reverse PTO speed, while the hydraulic system has a 2,000 kg lifting capacity. These specifications make the tractor suitable for a range of PTO-driven and mounted agricultural implements.

744 XT PTO

The PTO specification includes:

• PTO: 540/540
• PTO configuration: 4 multi-speed forward + 1 reverse
• Suitable for PTO-operated agricultural implements

The 744 XT PTO is relevant when selecting implements such as rotary tillers, rotavators and other PTO-powered equipment. Correct PTO speed selection helps operators match the tractor to the implement's operating requirements.

744 XT Hydraulics

The tractor has a 2,000 kg hydraulic lifting capacity. The hydraulic system is designed to lift and control compatible mounted implements used in cultivation and field preparation.

The tractor also features Easy Hitch as standard, while a directional control valve is available depending on configuration. These features can improve implement connection and hydraulic implement operation.

Swaraj 744 XT 4WD Features

The Swaraj 744 XT combines a high-displacement engine with practical transmission, hydraulic and operator-focused features. Its specifications are aimed at farmers who need a versatile tractor for multiple agricultural applications.

Important features include:

• 3,478 cc engine
• 3-cylinder configuration
• 46–50 HP category
• 2,000 RPM rated engine speed
• 8F + 2R transmission
• 2,000 kg hydraulic lifting capacity
• 540/540 PTO
• Oil-immersed brakes
• Digital instrument cluster
• LED fender and tail lamps on applicable variants
• Adjustable/fixed front axle options
• Mechanical or power steering options

The digital instrument cluster provides operating information, while oil-immersed brakes are intended to provide dependable braking performance in agricultural use.

Swaraj 744 XT 4WD Dimensions and Capacity

The TFE listing specifies an overall length of 3,560 mm, width of 1,830 mm, wheelbase of 2,165 mm and tractor weight of approximately 2,235 kg. The listed fuel tank capacity is 56 litres.

These dimensions provide useful context when evaluating the tractor for farm access, implement compatibility and storage requirements.

The published Swaraj brochure also gives configuration-specific dimensional information for the 744 XT, reinforcing the importance of checking the exact variant before comparing measurements.

Swaraj 744 XT 4WD Farming Applications

The Swaraj 744 XT 4WD is suited to farmers who require a versatile tractor for multiple field operations. Its engine output, PTO configuration and 2,000 kg hydraulic capacity support applications involving both mounted and PTO-driven implements.

Common applications include:

• Ploughing
• Rotavation
• Cultivation
• Sowing
• Puddling
• Haulage
• Seed drilling
• Field preparation
• PTO-driven implement operations

For wet, hard or uneven conditions, a 4WD configuration can provide greater traction than a conventional 2WD setup. However, the exact drivetrain should be confirmed because official Swaraj documentation currently describes the 744 XT specification page as 2WD, while TFE lists a 4WD version.

Swaraj 744 XT 4WD Implements

The Swaraj 744 XT's 2,000 kg hydraulic lifting capacity and 540 PTO make it compatible with a range of agricultural implements, subject to the implement's power and lifting requirements.

Suitable implement categories can include:

• Rotavators
• Cultivators
• Disc ploughs
• Seed drills
• Ploughs
• Trailers
• Ridgers
• Other compatible PTO-driven implements

The correct implement should always be selected according to required PTO power, implement weight, operating width, soil conditions and the tractor manufacturer's recommendations.

Swaraj 744 XT 4WD Maintenance

The Swaraj 744 XT has a stated 400-hour service interval in the official specification information. Regular maintenance is important for maintaining engine performance, hydraulic response and transmission reliability.

Basic maintenance checklist

• Check engine oil at recommended intervals.
• Inspect coolant and cooling-system components.
• Check hydraulic oil and leakage.
• Inspect PTO components before operation.
• Maintain correct tyre pressure.
• Inspect brakes regularly.
• Clean or service the air-cleaning system.
• Follow the manufacturer's scheduled service intervals.
• Use recommended lubricants and genuine replacement parts where applicable.

Maintenance costs can vary according to operating hours, location, replacement parts and usage conditions. Therefore, a fixed annual maintenance cost should not be stated without verified service data.

Is Swaraj 744 XT 4WD Suitable for Your Farm?

The Swaraj 744 XT is best considered by farmers looking for a tractor in the 45–50 HP class with a high-displacement engine, 2,000 kg hydraulic capacity and versatile PTO configuration. Its suitability depends on the implements used, soil conditions, acreage, transport requirements and the exact drivetrain variant available in the buyer's market.

Before purchasing, farmers should verify:

1. Exact 4WD/2WD configuration.
2. Applicable HP specification.
3. Gearbox and clutch configuration.
4. PTO configuration.
5. Hydraulic lifting capacity.
6. Tyre configuration.
7. Dealer quotation and applicable taxes.
8. Warranty and service support.

This final verification is particularly important because published specifications can differ by variant, configuration and model year.

 FAQs

1. What is the HP of the Swaraj 744 XT?

The Swaraj 744 XT is categorised by Swaraj in the 46–50 HP range, while Tractor For Everyone's 4WD listing identifies the model at 45 HP. Buyers should confirm the exact variant specification with the dealer.

2. What is the engine capacity of Swaraj 744 XT?

The Swaraj 744 XT has a 3,478 cc, 3-cylinder engine with a rated engine speed of 2,000 RPM.

3. What is the PTO speed of Swaraj 744 XT?

The 744 XT PTO is specified as 540/540, with four multi-speed forward speeds and one reverse PTO speed.

4. What is the hydraulic lifting capacity of Swaraj 744 XT?

The Swaraj 744 XT has a listed 2,000 kg hydraulic lifting capacity. This supports a wide range of compatible mounted agricultural implements.

5. Is Swaraj 744 XT available in 4WD?

Tractor For Everyone currently lists a Swaraj 744 XT 4WD configuration, but Swaraj's current 744 XT specification page identifies the front axle drive as 2WD. Therefore, customers should verify the exact drivetrain configuration with an authorised dealer before purchasing.